Separate names with a comma.
67 gt350 and gt500 both used 31 spline axles . The ones used interchange with both 68 and 69 big blocks Mustang/Shelby. There were 2 designs of...
None of the above are correct. The carry over cars came from SA with the 66 deluxe woodgrain Mustang wheel with the Shelby center cap. Remember...
I 'm sorry I misunderstood. The bell shaped cap is the correct style the cap. Texas Suede called it and so did Snakepit so I assumed that it was...
They both look good but since you asked --both the override undercarriage and the underride undercarriage have numerous details missing . Leaf...
They have the same contour as the outside. Just enough interference fit to be held on by the sides of the nut. Made some up myself similar to...
You didn't say if small block or big block. Remember big block and small block shifter controls are different. The shift control arms and levers...
The best way is to match the paint on the shock using a less exposed portion of the shock for professional results. If that is not possible then...
The top one is a 1967 390 the middle is a early 1968 428 and the bottom one is a later 1968 428. The question was concerning 67 428 and that...
(from SAAC site) Shawn ,thank you very much. Your photo has answered my question. Middle arm (my pics)came off of a early 68 GT500 it has a...
I wanted to know if I could get a few of you to take a look at your 67 gt500clutch forks hopefully a few are still original and tell me if it is...
The engineering drawings clearing state the louvered hoods are for air cars only . I don't know who you talked to at SAAC but it wasn't Dave...
The 67 GT500 and the GT350 both use a mechanical gauge so there is no "sender". The SW oil pressure gauge came with a installation kit that...
Keep in mind 67 and 68 hood hinges are physically different then 69 or 70 hinges. Here is a picture of a 67/68 hinge. The 69/70 has a cut out...
it is most likely as PD discribes . The coil mount location would be on the intake on a A/C equipped engine . This is a tell tale sign that the...
No they didn't use the sheet metal valve covers. I am not sure if it was the same picture because I don't have it in front of me but there was a...
I feel your pain. It sounds like you know what to do if you have to. On the other side of the fence I am sure it is refreshing news to those that...
A very good point and probably the reason for the photos.
Not uch to fill in you just about covered it. The Shelby marked oil pans,intakes ,valve covers etc. do not not have near as much of a market...
Mike,this is not meant to be insulting but the painful answer to your question is some creative welding and body work or a new fender without a...
I have had a bad experience and a good experience with Pat White the III. He has been around for 20 years or more and has had controversy just as...
Sometimes you have to use inferior products if you want to recreate the past. Unfortunately you can tell fairly easy if something is the superior...
Probably a Accel duel point even though it is not historically correct. Bob
Re: No gas to carb. Checked fuel pump The description and the process of elimination you followed would make me suspicious of the gas tank . I...
Are you looking for just the glass lens and cover or are you looking for the lens,cover and the bulb sockets?
Re: New Owner - Looking for the best Shelby Mustang Restoration Company in the countr The person I work with on all of my concours restorations...
