Separate names with a comma.
The back plate covers up the impeller and main pump cavity but has openings at the ends that match up with the timing cover passages for coolant...
I agree with Mike, you shouldn't have to drop the pan to replace the timing cover. I've done this a number of times on different cars and never...
Craig Conley may still have a few, that's where I got mine many years ago. I agree with Texas Swede and Steve, they are a very simple design and...
Thanks for the info Ken! If I can get enough data that shows any trends I'll put together a spread sheet and share the results with the forum....
I already posted this on the SAAC Forum but thought I'd post it here as well to hopefully get a little more exposure. If you've already replied on...
Brian, Welcome to the site and thanks for the pics. If those shock towers are original it looks like your car is part of the batch that didn't...
Bruce, The tag info you need should be quite similar to my original except for the ratio (mine is 3.89), something like this..... DSO C6ZX-B...
As mentioned Marti Auto Works will make a repop tag. There is also an original on ebay right now.........
Very cool ad! Wonder what car# it is, couldn't find that owner's name in the registry. Looks like it could be a Hertz........
Got mine from Daytona Parts. When I contacted Holley they referred me to them.
I'll try Jimmy but it may take a little while, don't have access to a scale accurate for light weights. I do think the lower set of pics looks...
Jimmy, Both my original lids, which includes the one OE to 6S1757, look like your first set of pics. Dave
Hi Jimmy, I still have the original brake drums on my 66 GT350 and they are like your second picture, they do not have the three small bumps. One...
Thanks Bo, out of town right now without my reference books and just don't trust the memory like I used to.
Bo, wasn't the 3255 also the carb used on the 427 Cobras? Dave
Actually you can run side exhaust on a 66 with underrides. Went on a drive last weekend with a friend who has that setup. The exhaust exit is just...
I think oven temp was somewhere around 200 degrees and IIRC a heavy coat was required or the paint wouldn't krinkle. Again this is where I would...
Jimmy, I've only done this once but it turned out great, no need to primer first. I think I used Krylon. Whatever brand you use follow the...
My frame rails also have a "creative" look from previous owners :mad:. I place a jack at the very front of the frame rail where the cars were...
Beautiful car! Not trying to nit-pick here but isn't it too late to have a bolt together fuel pump? Shouldn't the correct OE pump be a crimped...
I'm not that knowledgeable on 67's but believe the #2 pic HiPo fan was used only on 63-66 HiPos including 65-66 GT350. AFAIK the pic#1 fan was...
The main visible difference I'm aware of is OE bars have the "M-1" cast on the very ends. The newer bars have it cast on the top, or bottom...
Here is a picture of what Texas Swede is talking about, these are original 65-66 GT350 shock towers.
Most 66's after car#252 (last carry-over car) would have an open rear end from Shelby American regardless of whether it was a Hertz or not. Jimmy,...
Re: 1966gt350....will be changing plugs.... I have a couple of single BF-32 plugs like the ones in that auction, I'm still trying to figure out...
