Separate names with a comma.
Agree that it's strange that there are so many opinions about the carb for the 67 GT350 with automatic transmissions. However, isn't that what...
Hi again and thanks for all responses, I contacted Dave Mathews, SAAC registrar for 67's and he said that Bob Gaines, their head judge had...
Hi guys, Does anybody know for sure which carburetor Shelby used on the 67 GT350's with automatic transmission, Holley 3259-1 or Autolite? Pony...
Hi, Could it be the bracket that sits on the inside of the deluxe seat backs or maybe back seat hookup? /Texas Swede
My 65 C-code Mustang did exactly the same. No overheating, only spitting out anti-freeze. Had a lot of Calcium deposits in both radiator and...
My 67 Shelby hood had some serious warpage and I changed the springs to smaller size and after some time the hood sat pretty flat. Texas Swede
Re: 1967 Shelby GT500 Super Snake pix needed I found the article in Drag Strip from 67. Read it again and drooled over the pictures. The newer...
Re: 1967 Shelby GT500 Super Snake pix needed Hi, If I don't recall wrong, there was an article in the Dragstrip magazine in Aug. of 1967 about...
Hi, Were they 15" wheels like the registry says or 14" that you thought it was? Looks like 15" to me by the way they are filling out the wheel...
Agree with most posts above but I also know that the only ones making money on all these lawsuits are the lawyers. There is a reason why the US...
Hi, I have an original 67 AMPERES gauge extra but it needs some attention. Needle is not centered and glas must be removed and cleaned on the...
Hi, The Mustang Notchback Trans-Am cars that Shelby built was based on 1966 cars not 1965. He produced 16 Group II + 1 prototype. These had a...
The 65 GT350 in the Shelby cult movie Red Line 7000 from 1965 had head rests mounted. James Caan and beautiful Laura Devon were the stars in the...
Hi TLEA, I have 3 amp gauges with the arrow like pointer and they all say AMPERES instead of ALTERNATOR. Also have one of the OIL PRESSURE...
Please send pictures by email. /Bo
The 2 1/16 was only used on the Shelby 68's and there are two versions of which only one is correct for the Shelby. Look at the needle. Is it...
I bet it's either the ignition switch or coil. /Bo
Hi, Factory and maybe dealer installed Le Mans stripes were tapered on the 65 and 66 Shelbys but I strongly doubt that the dealer installed...
Bill, I remember those comments made by Howard Pardee in an old "The Marque" GT350 Technical Exchange. It is probably more than 20 years ago...
Re: Is it a Shelby Hi Lemuel, If you remove the Shelby Vin plate, the Ford number below shall be: 5R09K217XXX. If this number is correct you...
Congratulations! The person to person deals are the best as nobody else, like a dealer etc. is involved. As long as you know your stuff and is...
Hi Jerry, The one in my 65 has a longer handle (activator arm) than the Lucas one on the picture. Also, mine wasn't made by Lucas but I don't...
Hi Jerry, First, the 66 didn't have the horn switch on the dash as did the 65. The reason was that the 65 had a steering wheel without any horn...
Re: Wondering what wheels it should have Have you checked with SAAC what paper work they have on your car? If not, I recommend you to do so....
Hi Ken, I have the 66 Shop Manual in front of me now and the Rally Pac wiring can be seen in section 15 page 16. If you have an original 66...
