Separate names with a comma.
I have one - #2385 and there are others who post here that own or have in the family some of the others. The SAAC registry has the Ford VIN...
Jay, I would say it was accurate if 2. was amended from using the word "some " to "most ". I hate to use "all" because mistakes and anomalies...
Good question. I reviewed my notes and I can't find one that has both the date code and W-MO on the top tank along with the metal stamped...
Which is why I brought it up. Ether the soldered on tag (not brazed) is missing or the engineering number is metal stamped on the strap.Raised...
I don't see the engineering numbers in raised letters like the date code and mfg mark in the top tank. Are they there? Bob
The battery earth ground goes to the block .look on the block in the vacinity of the back of the alternator. there is also a small ground wire...
Re: Shelby GT350 carb return spring The spring hooks to a brkt that is bolted to the rear carb stud/nut and the other end of the spring hooks in...
The car is in good hands and is receiving a ground up resto as we speak but will most likely be next spring before it is ready to drive I am told.Bob
-Oil filler tube (pressed into intake)- black semigloss -Shock tower brackets-black semigloss -Sway bar brackets -bare steel -Throttle return...
Brian ,you can tell from the backside pictures that the tail panel is not a early or later 67 Shelby original tailpanel . Sorry. Bob
I can't remember the last time I pryed the valve covers off of a concours entry :laf: . Now if the car has a non stock lumpy cam that I can hear...
I spoke to a friend who owns Virginia Mustang to help because he goes to great lengths to sort out the good from the bad repros. You can always...
Ebay is probably the easiest place to shop for a mirror. you can try Jim C at Shelby Parts and Restoration. Yes that is a correct mirror for a...
Trent,first I would tape over the fins so you don't have to work those again and then bead blast with a more aggressive media then glass beads....
If you are concerned about oxidation because of a high moisture in the environment you are in then i would suggest rubbing on some Boe Shield...
They are supposed to be bare aluminum. Glass bead blast and give a bath in acidic Eagle One aluminum wash or the like before slightly polishing...
unpolished aluminum. Bob
I would try ether Virginia Mustang or NPD. Bob
The twist on repro cap pictured in the other post with the FOMOCO in block letters in a rectangle would be appropriate for the time frame a 67...
There are no lanyards on a street 65 or 66 GT350 from the factory. Remember the carry over car is meant to represent a 66 GT350.Bob
Just to clarify-There might be lanyards on various cars now and they are a handy edition but they are most likly owner installed . There are no...
Yes it was. I did that on my first car ,a 69 428 MACH I back in 1970. Bob
Bill , I am not sure if you are refering to the GT350 or the GT500 so I will try and be general. Only the 69 Shelby's that were converted to 70...
You'll be sorry unless your post is just meant to stir the pot:whistle:.
+1. you should be fine.
