Separate names with a comma.
I found this tool to work the best on fiberglass: http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=91773 using 60 grit paper....
Perhaps a part # to help the counter boys?
This is interesting. I was wondering why Mustangs Unlimited (of all places) carries AMK bolt kits for '65 and '66. Now I know. Thanks.
Thanks, good to know. I was going to use the sizes Roy provided and get them with allen heads, using some serrated washers, from my local...
Thanks Roy!
Hi all, I bought a Branda repro Cobra T-pan for my '66 GT and I know the stock bolts aren't going to cut it. Looks like they need to be about...
Absolutely stunning. That top really makes the car.
I've got a black '66 fb GT. It came to me red but I discovered, in descreet places, that the car was black originally. I've now got a...
Painting the 'seen' surfaces is easy. What I did for the cowl floor is to take a plastic handle 1" paint brush, heat the handle and carefully...
Might find something here: http://www.nvsaac.com/gallery/1965_main.htm
This is key. Make certain that "small diameter shaft at the point" is the same size as the pilot bushing in the crank. Most likely it is but its...
No, its not the crank, but the bushing that goes into the crank. I'm assuming your clutch alignment tool goes into this bushing. It pretty...
+1. My approach exactly. I let them soak for a good 8 hours, agitating the water every so often. Don't let the leathers get wet though.
Sometimes they mate quickly and other times it can take hours, for no apparent reason. So, how far apart is the trans from the bellhousing when...
I removed the same looking bar and mounting from my '66 GT. Mine didn't have any links and the plate that installed for the links looked...
Nice! Thanks for sharing...
Most generic auto parts stores carry the tool you'll need. It looks like a set of pliers with a hook and notch on either end. Easy to use but...
Very cool story! To be able to just get in it and drive it 5 hours (without problems, I presume), is icing on the cake :thumbsup:
As Roddster said, the site is now occupied by Continental Classics, selling high end sports cars. It's been there quite a while; there's a whole...
Sounds like a slight spline count mismatch. Can you look inside your trans tailshaft and see the shaft with the splines and count them? Compare,...
6t5, I love the look. What size tire are you running? Any lip rolling needed for the 15x8? What exactly is the back space? Thanks.
Bill, Sounds like the right 5th gear. A friend of mine had the LeMans cam, 4.11 gears and the T5Z with the .6 5th and 5th was usable at 70 and...
I can't answer your question but you might get better exposure if you post the question over in the Shelby Mustang forum. You'll find it if you...
Your timing is right on. It was on TV the other night and I caught only a few small segments but it was enough to pique my interest again so I...
Caps don't come with the wheels when you buy them. Today, one can spend over $100 for a set (c. $25/cap) so why bother and as 1175 pointed out,...
