Separate names with a comma.
http://www.amkproducts.com/ Most Mustang suppliers, such as Glazier Nolan, my favorite, stock items from AMK. I mention GN because they have...
Just go through the "bulk" list on AMK's site, I'm sure you'll find something satisfactory.
When Carter sold them you could get one manual or auto and one with no choke. This is the Cobra low-rise: [img]
Re: Opinion Please On my 1966 GT350 clone the steering is very hard to turn This is normal on a GT350, so I'd have to ask how close this "clone"...
I know a fellow with a 66 GT350 clone, built with all used original Shelby and NOS parts who found the intake you describe (and is illustrated...
Depends on the manifold. The low-rise had the carbs too close together to fit Holleys. Carters are easy to find- Edelbrock now makes them.
There was also C6ZZ-6B068-A, a high-rise 2-4V that used Holleys. [IMG]
Hmmm… I could lace into the detailing of the engine (more accurately the lack of it). But it would be sufficient to point out that although they...
The doors and decklid were installed before factory paint. Nothing else. Not the fenders or hood, or etc.
This is an unrestored 65. Like most, it has no LeMans stripes. It does however, have the rear badge, and if you look closely you'll see it's not...
Re: OK, I searched and I give up… Somebody found the link for me. YouTube- Replacement Tachometer YouTube- Replacement Tachometer
OK, I searched and I give up… Recently I saw a post somewhere that a vendor was modifying standard 67-68 instrument clusters to have the...
I must have a higher contrast ratio, it looked pretty clear here. You are quite right, and your link shows the area in question at least as well...
[IMG]
IIRC, the hole is 1/2". The reason for the hole, much larger than the wires, is at the factory there was a short piece of 1/2" steel tube to keep...
If you can find a 65 GT350 with an original equipment auto trans, let us know, as all records indicate the auto was not available on either the 65...
Yeah, this is why I stopped listening to "everyone" a long time ago. A friend bought one of those 12 years ago for $1200. I thought he was...
If your "bad" clutch is correct, I know where you can get it reconditioned. Then you'll know it's right.
Sounds familiar, but I won't commit without the MPC in front of me. However, that should be the 68-70 428CJ and 428SCJ pressure plate, and disc,...
Over Carburated You need to re-read my post. I didn't say it needed 1200 cfm, or would ever use it. A simple on-line carburetor calculator...
The primaries of each carb are connected as progressive manual bores. As along as you don't stomp the pedal too quickly, this should work well. (I...
I can believe that. The Holley was a POS next to the 4100.
Really? The largest 4100 (except for a one year only 650 item around 1960) was just shy of 600 cfm, barely big enough for the 289HP. I have to...
IIRC, the spacer (yeah, .28") was the same 68-69.
Well, the two-ring commutator and two-pin canceller pegs them as 65-66. As for "correct", I could only guess.
