Separate names with a comma.
Wayne, Dave, the owner of 5S396 made one for his car. I sent him some photos and measurements from mine. Texas Swede
Steve, I didn't think Shelby 65's had any back seat. Mine sure doesn't. Texas Swede
Hi, I ran Dunlop Qualifiers, 245x60x15 on 10 spokees for many years. My upper control arms are lowered 1" in accordance with the Boss 302...
Don't have any picture of the bungee cord but with steel wheels you wouldn't need a Cragar 7/8" wrench just the 13/16" ratchet type. Texas Swede
Thanks Bob, The one I use is yellow with yellow hooks and I found it in our shed at our summer house in Sweden. My mom used it to fit groceries...
Hi again Bob, Is the bungee cord on your picture original? Have heard before that the hooks should be yellow. Thanks, Texas Swede
Well, I am pretty sure you still need the ratchet type to use on the nut at the end of the jack to lift it up and down. The special wrench for...
Hi Bob, Shouldn't there be a standard ratchet handle as well? The reason being that the Cragars are 7/8" and the bolt to raise/lower the jack...
Mike, Tried this but can't get clear shots. Will try again tomorrow outside instead without flash. Texas Swede
Also, don't let him go there alone! Just some friendly advise. Deals that looks to good to be true, usually are. Texas Swede
The pictures shown of the block is highlighting the casting date and not the assembly date of the engine. The tag on the steering gear box shows...
What they call the DSO sheets are actually the Special Vehicle Order and Parts Specifications. That sheet lists all the specifics of that...
The original engine on 5S275 was assembled on May 3, 1965, 5E3 and the steering box tag says April 30, 1965, 5D30. Texas Swede
Hi, I bought a NOS bracket from Bob Perkins some years ago and it is black. Texas Swede
Roy, I have another idea. Let me drive your car the next time. Have very long arms reaching stuff I probably shouldn't. Think about it. Texas...
Yes Dave, It was. Teaxs Swede
Jimmy, If I don't recall wrong the R-model carb had a list number of 3255 and was rated at 780cfm. Texas Swede
Have two of the 67 black and white manual. Bought them in Brussels, Belgium from Claude Dubois in 1982. Cool NOS stuff in the collection. Texas...
It's a holley 725 cfm replacement carburetor for the 3259-1 that was used on early 65-67 Shelby GT350. I used to run a 4118 on my car (67) until...
Canuck, Please say hi to the Sedin twins when you meet them. Texas Swede
Pony restored a 715, 3259 for me some years ago and I was not happy. It performed like crap and when I called them they said they tested it on...
Joe Bunetic is a guy I have used in the past. Excellent work and not too expensive. /Texas Swede
Have heard that this is a quite common problem with the centerforce clutches. The reason being that the clutch return spring is made for the...
When I replaced my flasher, I had owned the car for 30 years and never changed the flasher. Summer of 2007 I installed a standard original...
Staffan, Yes, I was born in Sweden but now a Texan by choice. Write me a private message with your email address and I will respond. /Bo
