Separate names with a comma.
I used a repo on 5S275 for many years until I found an original including an oil pressure gauge. Sold the original gauge to another 65 owner....
Thanks Jeff, You are correct as always. Thought it was a San Jose thing as pictures of early 65 Shelbys, Dec. 64 production shows three screws...
Hi guys, Have observed that San Jose didn't follow the assembly manual when installing the kick panels on 65 Mustangs/Shelbys. The assembly...
Correct, the 66 tach is hooked up like a Rally Pac. Texas Swede
Hi, The primary is supposed to be 3/8" from the top and the secondary 1/2". Texas Swede
I have always used 20 foot pounds with a torque wrench on my COBRA oil pans. Never had any problems. /Texas Swede
Wouldn't be surprised if it happens though. Texas Swede
On the upright section in the back there is a screw very close to each upper corner. Then there are two screws at each lower front ears of the...
That's a very nice car. Great job!!!! Texas Swede
Roddster, you have to contact Fred by email. His email address is specified in my earlier post. I am not involved in any way more than I try to...
Hi, I am not an expert on carbs but I think you will have a compatibility problem between a plain 600cfm, 1850? and Le Mans bowls. It has a...
Please contact Fred on the email or phone number in my earlier post. Texas Swede
Many of you guys probably know or of Fred who was able to get crimped fuel pumps rebuilt. He is now working with the second batch so if your...
KONI sells tehse kits but they are different from the original ones. The rubber bushings are smaller (diameter) than the originals. /Texas Swede
The first picture with the round tip rubber cover appears to be correct. Will check mine when the weather here in texas get warmer. Texas Swede
You just push them on and they will stay because the inner diameter is a bit smaller than the diameter of the original nuts. The ones on my car...
If you send me a private message with your email address, I will send the PPG formula that was created for my 65 based on the color from original...
Same to you Steve and everybody else. Texas Swede
Re: 65 Shelby dash mounted horn switch Isn't the one for sale on ebay, one of Jerry's? Texas Swede
Re: Fuel pump working or not? The fuel filter on the sending unit in the tank could be clogged. It was on my 65 C-code. Took it out and cleaned...
What about this one: Roses are red, Violets are blue, I am schizophrenic and so am I. My son came home from school with this one more than...
Hi, There was a guy here in the Dallas area that did this service years ago. His name is Pat White III. He fixed my taillight harness and...
Re: No gas to carb. Checked fuel pump Had the same problem on my C-code Mustang and it turned out to be a clogged sending unit filter in the...
You probably put in the wrong gasket. Happened to me almost 30 years ago. The bottom part are different between the two types of front...
Wayne, Sent you the pictures and specific measurements of the Cragar Lug Wrench. Texas Swede
