Separate names with a comma.
I agree 100% about Bill. He has restored several shift levers for me and done an excellent job and not expensive either. Really a nice guy to...
What about the shift levers, early with sharp bend or later with smoother bend? Texas Swe
Jeff, Are you sure about this one. The front and back bolts on each side of the crank were larger in size and as far as I can tell they were hex...
Neil, Please send me a message with your email adress and we can continue the communication there. Want to make sure the guy who bought the...
Hi Neil, Have been able to track down the guy who bought the hood on Ebay and which I took the picture and my friend is calling or emailing him...
Hi Neil, There is a way to search on completed auctions and I did that but unfortunately it didn't go far back enough. Will check my emails if...
Neil, This one was sold on Ebay last year. It was presented as being original for a 65 Shelby and because of the lack of the extra rib from the...
Thanks, that was a great story. They are still out there. Good luck with your new car. Maybe will meet you in Dallas some time. Texas Swede
You are so correct Bob, it would be ironic if we have to sell our cars to pay the taxes based on the value of the same cars. Sounds like Sweden...
All Shelby 65's I have seen with original radiators have the same marking but the G2 is raised in the tank. As regards a tag with the G2, somebody...
John, HEH-BX was supposed to be used in 66 not 65 but many 67's got them as well. I have a HEH-BX from a 67 Mustang HiPo in my Shelby in Sweden....
Neil, I took an original front 4-65 dated Koni to the paint shop and they checked the paint under the bottom bracket where the paint didn't...
Hi, Here is a picture of the 721 dated 3259-1 Holley with a dashpot. Texas Swede
Shifter and rods are available on ebay. $335. Texas Swede
Close Ratio T10 with either an aluminum case and tail shaft, cast iron on both or combination of cast iron and aluminum. My best guess will be a...
Jeff, I measured one of the NOS plates I have in S1MS marked bags and it's exactly 9/16". Texas Swede
Aren't there two questions, was a template used and the location. It would, in my humble opinion, be very difficult to make sure you drill the...
1/8" or 3mm Toe In. Texas Swede
Amazing, but a a 67 Mustang won the East African rally. Old ponies are a winning concept still: See link...
Jeff, Have you checked it's not your wife trying to sell her car? Texas Swede
In the late seventies, in Stockholm, Sweden the Shelby importer Hansen Racing had 5 of the left wheel type hanging on the wall in his shop....
Sanpablo, Branda's specs are taken directly from the Manual I got it from. /Texas Swede
Hi guys, I found the Accessories Installation Manual from Shelby American Inc. and it says the following regarding the installation of the...
I know for a fact that one of the corner bolts should be torqued less than the others, just don't remember which but probably the one with the...
Checked my 65 Shelby Owners Manual and it specifies 14-16 ft/lbs. Texas Swede
