Separate names with a comma.
Hi, Mark Hovander, 5S284, specifies on his web page that the wheels were changed from 15x5.5" to 15x6.0" when cars with the Ford serial number...
Re: 65 on ebay Shelby American Inc. Texas Swede
Jerry, The R-models I have seen has had the horn switch above the radio opening in the dash, quite far to the left. Different positions, i.e....
Jerry, Please remember that the horn switch placement for the R-model was different than the one for the S-model. Texas Swede
Re: 67 radio antenna Does your Marti Report mention anything about a radio. The Marti Report on my 67 #1317 doesn't and it had an AM radio and...
Hi again, Here is a picture of the switch in my 5S275. Took about 5 pictures but the rest didn't come out that good. Texas Swede
Hi, Here are a couple of pictures of an original switch and bezel. Can take a few from the installed one in my car later today. Texas Swede
Hi guys, Some time ago, I bought a spare switch from a vendor in the U.K. It looks like the original with two exceptions: Bezel is plastic...
Jeff, I agree that early May is the best guess. Look at the dates on my car, very tight between engine assembly date and car received at...
Jeff, According to the SAAC registry 5S337 was received at Shelby on 5/9/65 and my car 5S275 on 5/13/65. My car was produced arround 5/7-10 as...
Pete, Your car 5S337 was made by Ford in San Jose the first days of May 65 and most panels will be from April 65. Do you still have the...
I think Pete means when the car was shipped from Shelby. I checked the registry and 5S337 arrived at Shelby on 5/9/65. Four days prior to my...
Have read this site for years and learnt a lot about 65 Shelbys. Picture of 5S114, Owners Manual, Stories etc are excellent. Mark and Dave do an...
Hi guys, Tried to post answer on earlier tread about this under Mechanical below but was denied so I started a new tread instead: Mike or...
Dan is correct with the measurements on the float levels. Please remember though, that they are from the float to the top of the bowl. Many...
If the car still idles with the screws bottomed, there must be fuel leaking into the manifold. I had this problem on my 67 Shelby and it was the...
Congratulations Eric, I looked at my original factory issued 67 ad pamphlet in color, The Road Cars, the one with the lime green car on the...
In the late 70's or early 80's there was a guy, Ronald Bloom in Sweden, that created (crossed) a Weber intake and a Cobra intake, i.e. got the...
AussieLand, #1317 was built on schedule at San Jose by Ford on 1/31/67 but wasn't completed at Shelby until 5/25/67. It was given DSO Item#...
Good idea, My car, 67402F7A01317 has Non-Functional Scoops. Texas Swede
Hi, I was lucky and found an original in a Ford box but I have been told that people use some really fine steel wool and then paint the whole...
Hi Steve and welcome aboard, During the first Pony Drive in 1989 when 37 Mustangs from Europe were shipped over and drove across this great...
My 67 Shelby had the same problem including very dim brake lights. It turned out to be the brake light switch at the pedal. Don't know why the...
Congratulations to you two, Texas Swede
Had the same problem on my 67 and have used a relay for more than 25 years. I placed the relay in engine bay and probably should move it to...
