Hi, Can somebody help me with the correct outer diameter of th venting hose? I believe it is the same diameter like the venting hose from the valve cover to the manifold on GT350 ...but not sure..at least the clamp looks like! Harald
Thank you COBRAMAN19! Are you familiar with the R-Model? May I ask you some more questions? E.g. correct engine mounts...because my carb plenum has not enough room under the hood (1/2 inch missing - can‘t close the hood) Following parts are assembled: - 289 - HiPo C5ZZ Engine mounts from Scott Drake - 66 Cobra Intake - 715 lemans carb - R-Model hood from Jim Cowles
I know 66 hipo engine mounts raise the engine a 1/2 or more. If you have the 66 style that could be your problem. https://www.npdlink.com/product/motor-mount-assy-hipo-complete-concours-correct-kit/201682/203225
Yes, I do have exactly these HiPo engine mounts from NPD. I will investigate the engine mounts parts to verify the difference vs the 64/65 version... - Casting bracket to frame - lower bracket - insulator - upper bracket