Join Shelby Forums Today

Need some help locating a part FOMOCO 1968 radiator

Discussion in '1965-1970 Shelby Mustang GT350 & GT500' started by Tout, Feb 1, 2006.

  1. Tout

    Tout Well-Known Member

    Age:
    66
    Posts:
    166
    Likes Received:
    0
    Joined:
    Nov 2, 2004
    Location:
    Doylestown . Pennsylvania
    Does anyone know of a source to find a correct FOMOCO 1968 radiator for a big block ,4spd, mustang, either recored or not. Also does anyone do restamping of the tops ?
    Tout
     
  2. TLEA

    TLEA Well-Known Member

    Age:
    66
    Posts:
    887
    Likes Received:
    11
    Joined:
    Oct 17, 2005
    Location:
    Warwick, Rhode Island
    Re: Need some help locating a part

    There are differences. If it is a 390 car it likely has a C8ZE S1. If it is a Shelby or CJ it likely has a C8ZE L1 althouth I've heard of at leasts one coming with a S 1. It also matters were the car was made as San Jose cars have W MO on top tank and Metuchen cars, including Shelby have FoMoCo on tank. I'm not sure about Dearborn cars. Your best bet is ebay and likely it will need a core. The L 1s don't come around often, the S 1s are more common.
    Tim
     
  3. Tout

    Tout Well-Known Member

    Age:
    66
    Posts:
    166
    Likes Received:
    0
    Joined:
    Nov 2, 2004
    Location:
    Doylestown . Pennsylvania
    Re: Need some help locating a part

    TLEA,
    Your right on the numbers .I am looking for a C8ZE L1, and a S1 will also be correct.
    The car is a Metuchen car and should have FOMOCO on it.Any leads would be apreciated.
    Thanks Tout
     
  4. TLEA

    TLEA Well-Known Member

    Age:
    66
    Posts:
    887
    Likes Received:
    11
    Joined:
    Oct 17, 2005
    Location:
    Warwick, Rhode Island
    Re: Need some help locating a part

    Based on what I've seen most cars I've seen have the L1. I've only heard of one having an S1 (Pete's site) I notice you are in Doylestown. I grew up in Pottstown. Did you check with Allen Cross? I think I got one from him before. Just FYI C8ZE L1s were used in some 69 cars so check the date stamps if that is important to you.
    Tim
     
  5. Tout

    Tout Well-Known Member

    Age:
    66
    Posts:
    166
    Likes Received:
    0
    Joined:
    Nov 2, 2004
    Location:
    Doylestown . Pennsylvania
    Re: Need some help locating a part

    TLEA,
    Thanks for the information, I have never used Allen Cross, do you have a number to reach him?
    Tout
     
  6. dwdshelby

    dwdshelby Active Member

    Age:
    58
    Posts:
    37
    Likes Received:
    0
    Joined:
    Jun 10, 2005
    Look up Fomoco Obsolete (www.fomoco.com) on the web - 215-949-9998. Not cheap but good parts.
     
  7. dwdshelby

    dwdshelby Active Member

    Age:
    58
    Posts:
    37
    Likes Received:
    0
    Joined:
    Jun 10, 2005
    I suspect Perogie Enterprises (609-448-1684) or Bill Herndon's Pony Warehouse (301-977-0309) would probably have it as well.
     
  8. Tout

    Tout Well-Known Member

    Age:
    66
    Posts:
    166
    Likes Received:
    0
    Joined:
    Nov 2, 2004
    Location:
    Doylestown . Pennsylvania
    Thanks for the leads guy's,
    This is an item that 27 years ago didn't mean that much, today it's the only thing missing on a complete KR.I have a call into Allen and I have asked Bill and George to be on the lookout ,Columbus is not that far away,April.
    If one happens to come up please give me a call , Tout
     
  9. Tout

    Tout Well-Known Member

    Age:
    66
    Posts:
    166
    Likes Received:
    0
    Joined:
    Nov 2, 2004
    Location:
    Doylestown . Pennsylvania
    This item must be one of the hardest things on earth to find,I have just about called everyone known in the hobby to no avail.Is there a market for reproducing this item and how hard would it be?Any pictures out there of what this looks like?
    Tout
     
  10. TLEA

    TLEA Well-Known Member

    Age:
    66
    Posts:
    887
    Likes Received:
    11
    Joined:
    Oct 17, 2005
    Location:
    Warwick, Rhode Island
    Not the hardest. C8ZX fan clutch, NOS C7 battery inner fender, 68 console rear ashtray come to mind. I can send you a picture if you need one but it is pretty much like any 24" FoMoCo radiator. I wouldn't think there would be much of a market and the costs would be high because of the licensing to use the FoMoCo name. Keep looking, I see about 2 or 3 turn up a year (L1's)
    I'll email you if I see one.
    Tim
     
  11. saint

    saint New Member

    Posts:
    1
    Likes Received:
    0
    Joined:
    Jan 6, 2007
    Hello,I will be Ebaying my C8ZE-L1 4 Speed radiator in the next couple of weeks.Time to liquidate a couple of things. If anyone is wanting the Ebay # I will e-mail it to them when it hits Ebay.Thanks Wayne saint@cablelan.net
     
  12. rjinpa500

    rjinpa500 Member

    Posts:
    11
    Likes Received:
    0
    Joined:
    Jun 22, 2005
    Old thread I know.....but my 68 GT500 has an S1.

    Rod
     
  13. TLEA

    TLEA Well-Known Member

    Age:
    66
    Posts:
    887
    Likes Received:
    11
    Joined:
    Oct 17, 2005
    Location:
    Warwick, Rhode Island
    Rod,
    S1 is an automatic radiator. The 68 autos could have M1s as well.
    Tim
     
  14. rjinpa500

    rjinpa500 Member

    Posts:
    11
    Likes Received:
    0
    Joined:
    Jun 22, 2005
    OK, thanks.. yea, my GT500 is an auto.

    I mis-read the post and thought it said it should be an L1.:doh:
     
  15. KensKR

    KensKR Well-Known Member

    Age:
    64
    Posts:
    85
    Likes Received:
    2
    Joined:
    Nov 16, 2005
    Location:
    Virginia
    A L1 radiator just sold on ebay last night, it sold for $1,525.00
    item number 200073659710
     
  16. Tout

    Tout Well-Known Member

    Age:
    66
    Posts:
    166
    Likes Received:
    0
    Joined:
    Nov 2, 2004
    Location:
    Doylestown . Pennsylvania
    I had purchased mine last year for 950.00, NOS and date code correct for my car,I was lucky and had calls into everyone I new for the last 20 years. I have seen cores going for 500.00 to 750.00 in the last few months, this part for a correctly restored car is on of the hardest to find, most were discarded for a new aftermarket one at half the cost.
    Tout
     
  17. raceri69

    raceri69 Member

    Posts:
    8
    Likes Received:
    0
    Joined:
    Jan 30, 2007
    Hello : FoMoCo 68 Radiator, big block, 4 speed...... What date code do you need ??? A good friend has been a huge Ford dude for 30 + years, has shelves and racks of etc. I have his blessing, to go thru his inventory, tag and catolog all items. I hope to get to this project, huge as it is, starting 4-28-07. PLMK what date code you need, and I will try to help you get it, if he has it. Jeff. raceri69
     

Share This Page