Please provide direction on correct finishes (paint, phosphate, bare, etc) for the following. Car is a March 67 build if it matters. -Oil filler tube (pressed into intake) -Shock tower brackets -Sway bar brackets -Throttle return spring bracket -Throttle rod from carb to pedal rod(bellcrank???) Thank you for the help...
-Oil filler tube (pressed into intake)- black semigloss -Shock tower brackets-black semigloss -Sway bar brackets -bare steel -Throttle return spring bracket- zinc silver -Throttle rod from carb to pedal rod - was zinc silver most of the time but have seen a few zinc phosphate gray. Bellcrank -zinc silver I hope this helps. Bob