[Bob Gaines]

I don't want to stir the pot or offend PD who has proven to me on numerious occasions to be very knowledgeable but in this case the steering box washers are too thick to be used for the shock tower brkts. AMK sells the correct thickness to make them up. You just have to call and ask for the ones used for the shock tower brkts and they always know what I want. I center them on the bkt tack weld it like the factory and if for 67-70 then using a cut off saw cut the inside edge flush with the opening then paint and what you have would make the Quality Control Staff (ha ha )at Shelby American back in 1967 proud. I think they look better with this approach but a less hassle free way is to call NPD .I think they sell them ether black or Chrome (yuk).