Hi to all on this thread.As mentioned by several already..esp. Bob, I would also very strongly suggest use of the washer/or spacer.It really helps prevent the metal from bending near the bolts,and is a must on a car with H.D. suspension.And just for the record..they are the same as the ones used under the bolts that hold the steering box to the frame rail.Also when they bend,the bolts dont align properly-next thing to happen is damaged threads,which is why many end up being replaced.If you drive this car,it will benefit from this simple addition.We nick named them KONI washers way back when,because all cars with KONI'S all seemed to have them.
